XF86Config for MELCO WSN-A2F
戻る
# : xc/programs/Xserver/hw/xfree98/XF98Conf.cpp,v 3.13.2.3 1998/02/24 13:54:31 hohndel Exp
#
# Copyright (c) 1994 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# : XF98Conf.cpp /main/9 1996/10/25 10:34:37 kaleb
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file. This man page is installed as /usr/X11R6/man/man5/XF86Config.5
# **********************************************************************
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#Xのフォントのあるパスを指定します。
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
#FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
#FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
#FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
#FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
#FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# For OSs that support Dynamically loaded modules, ModulePath can be
# used to set a search path for the modules. This is currently supported
# for Linux ELF, FreeBSD 2.x and NetBSD 1.x. The default path is shown
# here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which dynamically loadable modules to load. Dynamically loadable
# modules are currently supported only for Linux ELF, FreeBSD 2.x
# and NetBSD 1.x. Currently, dynamically loadable modules are used
# only for some extended input (XInput) device drivers.
# **********************************************************************
#
# Section "Module"
#
# This loads the module for the Joystick driver
#
# Load "xf86Jstk.so"
#
# EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# DontZoom
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# DisableVidModeExtension
# Uncomment this to enable the use of a non-local xvidtune client.
# AllowNonLocalXvidtune
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# DisableModInDev
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# AllowNonLocalModInDev
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Protocol "Xqueue"
AutoRepeat 500 5
# Let the server do the NumLock processing. This should only be required
# when using pre-R6 clients
# ServerNumLock
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1))
# Xleds 1 2 3
# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock:
# LeftAlt Meta
# RightAlt ModeShift
# RightCtl Compose
# ScrollLock ModeLock
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).
# These are the default XKB settings for XFree98
# XkbRules "xfree98"
# XkbModel "pc98"
# XkbLayout "nec/jp"
# XkbVariant ""
# XkbOptions ""
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "BusMouse"
# For FreeBSD(98)-2.X
Device "/dev/mse0"
# For NetBSD/pc98 (based on NetBSD 1.1 or later)
# Device "/dev/lms0"
# For NetBSD/pc98 (based on NetBSD 1.0)
# Device "/dev/mms0"
# For Linux/98
# Device "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#2ボタンマウスなので3ボタンエミュレーションを有効にする。
Emulate3Buttons
Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Xinput section -- this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "Xinput"
# SubSection "WacomStylus"
# Port "/dev/ttyS1"
# DeviceName "Wacom"
# EndSubSection
# SubSection "WacomCursor"
# Port "/dev/ttyS1"
# EndSubSection
# SubSection "WacomEraser"
# Port "/dev/ttyS1"
# EndSubSection
#
# SubSection "Elographics"
# Port "/dev/ttyS1"
# DeviceName "Elo"
# MinimumXPosition 300
# MaximumXPosition 3500
# MinimumYPosition 300
# MaximumYPosition 3500
# Screen 0
# UntouchDelay 10
# ReportDelay 10
# EndSubSection
#
# SubSection "Joystick"
# Port "/dev/joy0"
# DeviceName "Joystick"
# TimeOut 10
# MinimumXPosition 100
# MaximumXPosition 1300
# MinimumYPosition 100
# MaximumYPosition 1100
# # CenterX 700
# # CenterY 600
# Delta 20
# EndSubSection
#
# The Mouse Subsection contains the same type of entries as the
# standard Pointer Section (see above), with the addition of the
# DeviceName entry.
#
# SubSection "Mouse"
# Port "/dev/mouse2"
# DeviceName "Second Mouse"
# Protocol "Logitech"
# EndSubSection
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic Monitor"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 # typical for a single frequency fixed-sync monitor
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 60 # typical for a single frequency fixed-sync monitor
# VertRefresh 50-100 # multisync
# VertRefresh 60, 65 # multiple fixed sync frequencies
# VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
# These two are equivalent
# ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
Mode "640x480"
DotClock 25.175
HTimings 640 664 760 800
VTimings 480 491 493 525
EndMode
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
EndSection
Section "Monitor"
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#マルチスキャンディスプレイの設定
Identifier "Multi sync"
VendorName "NEC"
ModelName "MultiSync X500"
Bandwidth 40
HorizSync 24-70
VertRefresh 50-100
Mode "640x400"
DotClock 28.322
HTimings 640 664 712 808
VTimings 400 400 402 417
EndMode
Mode "640x480"
DotClock 28.0
HTimings 640 690 752 800
VTimings 480 496 544 560
EndMode
Mode "NEC480"
DotClock 31.5
HTimings 640 664 760 800
VTimings 480 491 493 525
EndMode
Mode "800x600"
DotClock 36.00
HTimings 800 840 900 1000
VTimings 600 602 610 664
EndMode
Mode "1024x768"
DotClock 65.00
HTimings 1024 1188 1210 1370
VTimings 768 768 770 790
EndMode
Mode "1024x768i"
DotClock 45.00
HTimings 1024 1030 1230 1260
VTimings 768 768 790 830
Flags "Interlace"
EndMode
Mode "1024x768H"
DotClock 75.00
HTimings 1024 1088 1204 1318
VTimings 768 771 777 806
EndMode
Mode "1280x1024"
DotClock 109.00
HTimings 1280 1290 1680 1696
VTimings 1024 1027 1030 1064
EndMode
Mode "1280x1024H"
DotClock 110.00
HTimings 1280 1300 1315 1700
VTimings 1024 1027 1030 1064
EndMode
EndSection
Section "Monitor"
# This is dummy definition. Don't edit this section.
# EGC can't take variable value.
Identifier "PC98normal"
VendorName "Unknown"
ModelName "Unknown"
BandWidth 25.2
HorizSync 43.75
VertRefresh 109.38
Mode "640x400"
DotClock 28
HTimings 640 640 640 640
VTimings 400 400 400 400
EndMode
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "EGC16"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
Section "Device"
Identifier "NEC480"
VendorName "Unknown"
BoardName "Unknown"
Chipset "pegc"
VideoRam 512
Clocks 31.5
# Virtual resolution for 640x400
# Clocks 28.322
EndSection
Section "Device"
Identifier "WAB"
VendorName "MELCO"
BoardName "WAB-S/1000/2000"
Chipset "clgd5426"
# Chipset "clgd5428"
VideoRam 1024
# VideoRam 2048
EndSection
Section "Device"
Identifier "WABEP"
VendorName "MELCO"
BoardName "WAB-EP"
Chipset "clgd5428"
Option "med_dram"
EndSection
#Option "no_mmio"を追加。
Section "Device"
Identifier "WSNA2F"
VendorName "MELCO"
BoardName "WSN-A2F"
Chipset "clgd5434"
Option "no_mmio"
Option "med_dram"
EndSection
Section "Device"
Identifier "GA98NB1"
VendorName "IO DATA"
BoardName "GA-98NBI"
ChipSet "clgd5434"
ClockChip "cirrus"
Option "ga98nb1"
Option "no_mmio"
# Option "mmio"
# Option "sw_cursor"
EndSection
Section "Device"
Identifier "GA98NB2"
VendorName "IO DATA"
BoardName "GA-98NBII"
ChipSet "clgd5434"
ClockChip "cirrus"
Option "ga98nb2"
Option "no_mmio"
# Option "mmio"
# Option "sw_cursor"
EndSection
Section "Device"
Identifier "GA98NB4"
VendorName "IO DATA"
BoardName "GA-98NBIV"
ChipSet "clgd5434"
ClockChip "cirrus"
Option "ga98nb4"
Option "no_mmio"
# Option "mmio"
# Option "sw_cursor"
EndSection
Section "Device"
Identifier "WAP"
VendorName "MELCO"
BoardName "WAP-2000/4000"
Chipset "clgd5434"
Option "no_mmio"
# Option "epsonmemwin"
Option "wap"
EndSection
Section "Device"
Identifier "NKVNEC"
VendorName "EPSON_NEC"
BoardName "PCNKV/PCNKV2/NEC_CIRRUS"
Chipset "clgd5428"
# Chipset "clgd5429"
# Chipset "clgd5430"
# Option "no_mmio"
# Option "nec_cirrus"
# Option "fast_dram"
VideoRam 1024
EndSection
Section "Device"
Identifier "NECTrident"
VendorName "NEC"
BoardName "NEC Trident"
Option "xaa_no_color_exp"
# Option "noaccel"
# Option "Linear"
# Option "med_dram"
# Option "hw_cursor"
Endsection
Section "Device"
Identifier "GA-DRV98"
VendorName "IO DATA"
BoardName "GA-DRV/98"
Option "noaccel"
# Option "med_dram"
# Option "hw_cursor"
VideoRam 4096
# VideoRam 2048
Endsection
Section "Device"
Identifier "MGA"
VendorName "Matrox"
BoardName "Millennium"
EndSection
Section "Device"
Identifier "PW"
VendorName "canopus"
BoardName "PowerWndow928/801"
Chipset "s3_generic"
# Chipset "mmio_928"
Ramdac "sc15025"
Dacspeed 110
Option "dac_8_bit"
# Option "epsonmemwin"
# Option "nomemaccess"
ClockChip "icd2061a"
EndSection
Section "Device"
Identifier "PW928II"
VendorName "canopus"
BoardName "PowerWndow928II"
# Chipset "mmio_928"
Chipset "s3_generic"
Ramdac "att20c505"
Dacspeed 110
Option "dac_8_bit"
# Option "pw_mux"
Option "bt485_curs"
# Option "epsonmemwin"
# Option "nomemaccess"
ClockChip "icd2061a"
EndSection
Section "Device"
Identifier "PW805i"
VendorName "canopus"
BoardName "PowerWndow805i"
Chipset "s3_generic"
Ramdac "s3gendac"
Dacspeed 110
Option "dac_8_bit"
# Option "pw805i"
# Option "epsonmemwin"
# Option "nomemaccess"
ClockChip "s3_sdac"
EndSection
Section "Device"
Identifier "PW928GLB"
VendorName "canopus"
BoardName "PowerWindow928GLB"
Chipset "s3_generic"
# Chipset "mmio_928"
Ramdac "sc15025"
Dacspeed 110
Option "dac_8_bit"
# Option "pw_localbus"
# Option "nomemaccess"
# Option "nolinear"
ClockChip "icd2061a"
EndSection
Section "Device"
Identifier "PW928IILB"
VendorName "canopus"
BoardName "PowerWindow928IILB"
Chipset "s3_generic"
# Chipset "mmio_928"
Ramdac "att20c505"
Dacspeed 110
Option "dac_8_bit"
Option "bt485_curs"
Option "pw_localbus"
# Option "pw_mux"
# Option "nomemaccess"
# Option "nolinear"
ClockChip "icd2061a"
EndSection
Section "Device"
Identifier "PW964LB"
VendorName "canopus"
BoardName "PowerWindow964LB"
Chipset "s3_generic"
Option "pw_localbus"
Option "number_nine"
Ramdac "ti3025"
ClockChip "ti3025"
VideoRam 4096
EndSection
Section "Device"
Identifier "PCSKB"
VendorName "EPSON"
BoardName "PCSKB"
Chipset "s3_generic"
Ramdac "sc15025"
Dacspeed 110
Option "dac_8_bit"
# Option "nomemaccess"
Option "pcskb"
Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0
Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0
EndSection
Section "Device"
Identifier "PCSKB4"
VendorName "EPSON"
BoardName "PCSKB4"
Chipset "s3_generic"
Ramdac "sc15025"
# Ramdac "20c498"
Dacspeed 110
Option "dac_8_bit"
Option "nomemaccess"
Option "pcskb4"
Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0
Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0
EndSection
Section "Device"
Identifier "NECWAB"
VendorName "NEC"
BoardName "NEC WAB-A/B/928"
Chipset "s3_generic"
Dacspeed 110
Ramdac "sc15025"
Option "dac_8_bit"
# Option "necwab"
# Option "nomemaccess"
Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0
Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0
EndSection
Section "Device"
Identifier "NEC864"
VendorName "NEC"
BoardName "NEC 864"
Chipset "s3_generic"
Option "necwab"
Ramdac "s3_sdac"
ClockChip "s3_sdac"
EndSection
Section "Device"
Identifier "GA-968"
VendorName "IO DATA"
BoardName "GA-968V4/PCI"
Chipset "s3_generic"
# Chipset "mmio_928"
# Option "ga968"
VideoRam 4096
# VideoRam 2048
Endsection
# **********************************************************************
# Screen sections
# **********************************************************************
# The colour SVGA-based PC98 server
#Device "WSNA2F"を有効に。
Section "Screen"
Driver "svga"
# Device "WAB"
# Device "WABEP"
# Device "NEC480"
# Device "WAP"
Device "WSNA2F"
# Device "NKVNEC"
# Device "GA98NB1"
# Device "GA98NB2"
# Device "GA98NB4"
# Device "NECTrident"
# Device "GA-DRV98"
# Device "MGA"
Monitor "Multi sync"
Subsection "Display"
Depth 8
# Modes "800x600" "640x480" "1024x768"
#1024x768で使用する
Modes "1024x768H" "640x480"
# Modes "1024x768H" "640x400"
# Modes "NEC480" "640x400"
ViewPort 0 0
# Virtual 1024 1024
# Virtual 1024 1022
#1024x768で使用する
Virtual 1024 768
# Virtual 640 480
# Virtual 640 400
# Virtual 1280 816
EndSubsection
EndSection
# The 16-colour VGA-based PC98-EGC server
Section "Screen"
Driver "vga16"
Device "EGC16"
Monitor "Multi sync"
Subsection "Display"
Modes "640x400"
ViewPort 0 0
Visual "PseudoColor"
EndSubsection
EndSection
# The accelerated servers (S3-NEC,PW,PW-LB,PCSKB)
Section "Screen"
Driver "accel"
# Device "PW"
# Device "PW928II"
# Device "PW805i"
# Device "PW928GLB"
# Device "PW928IILB"
# Device "PW964LB"
# Device "GA-968"
# Device "PCSKB"
# Device "PCSKB4"
# Device "NECWAB"
# Device "NEC864"
Monitor "Multi sync"
Subsection "Display"
Depth 8
# Modes "1024x768i" "640x480" "800x600"
# Modes "1024x768H" "640x480" "800x600"
Modes "1024x768" "640x480" "800x600"
# Modes "1280x1024" "1024x768" "640x480" "800x600"
# Modes "1280x1024H"
ViewPort 0 0
# Virtual 1280 1024
Virtual 1024 768
EndSubsection
SubSection "Display"
Depth 16
Weight 565
# Modes "640x480" "800x600" "1024x768"
Modes "800x600" "1024x768"
ViewPort 0 0
Virtual 1024 768
EndSubsection
EndSection